SMD component automatic test packaging machine

　　 model:ATF-10
　　 Use: the taping packages of a variety of surface mounting devices(SMD).
　　 Capability and parameter
　　 ·Applicable types of components:can be customized for components of your company;
　　 ·Specifications of carrier tapes:8-44mm tape width;
　　 ·Production capacity of the machine:（based on the specifications of component）;
　　 ·Specifications of machine tapes:as for different components，the fixture can be replaced for hot pressing or cold seal packaging of 8 to 44mm wide tapes;
　　 ·Power supply:AC220V±20%/50HZ，5A;
　　 ·Compressed air supply:0.3~0.6Mpa/60L/Min;
　　 ·Loading mode:materials are loaded by the vibrating disk, and the feeding speed is 160 pieces per minute ;
　　 ·Working environment:clean room，the temperature of no more than 0 to 50℃ and humidity of no more than 35 to 85%,without condensation;
　　 ·The detection speed of visual system:150ms/pc，detection accuracy of more than 0.1mm，and the erroneous recognition of no more than 1‰;
　　 ·Machine size:L1520mm×W930mm×H1585mm
　　 ·Other requirements:to be customized according to customer requirements by consultation。
　　 ·Operating temperature :0℃（32℉）to 45℃（113℉）
　　 ·Humidity:90%，without condensation
　　 ·Vibration:10-2000Hz,10G,according to IEC68-2-6